For Stucco & Veneer Stone

EZ BEAD VS BACKER ROD

 Positives of using E-Z Bead

Manufactured stone, EIFS & stucco are extremely popular home exterior coverings.  Despite their considerable durability hairline cracks will form, most frequently in the mortar joints.  These cracks are especially common in parts of the country that experience frequent freeze/thaw weather patterns.  These hairline cracks allow wind-driven rain to penetrate the mortar and collect within the interior wall.  Once the moisture gets in it has nowhere to go thus creating the perfect environment for toxic mold growth.

Mortairvent® is a two-ply mortar deflection and ventilation system that had been specifically designed for use with manufactured stone, stucco, EIFS and brick. By installing the Mortairvent® two-ply system, a ventilation cavity is created between the vapor barrier and exterior wall.  The blue polymer core mesh creates the airspace, while the filter fabric blocks mortar droppings from seeping into this newly formed cavity, while still allowing moisture to pass through.  The combination of drainage and ventilation eliminates the threat of toxic mold.

CLICK HERE FOR LEEDS CREDITS DOCUMENTATION

CLICK HERE FOR SUBMITTAL SHEET

FOR MORE PRODUCT DETAILS CLICK THE LOGO BELOW:

                      

 Silpro California Stucco® is a portland cement based, water resistant coating that is easy to apply and withstands severe climatic conditions. It may be applied in a great many textures and is a low maintenance finish. Use on any building facade that needs an aesthetically pleasing, durable, impact resistant finish. California Stucco may be applied from 1/8"-3/8" thick.   

XO WHITE TM      

XO WHITE ^TM is a dry ground marble with a coarse particle size that is controlled between 16 and 40 mesh screens. In addition to textured coatings and acid neutralization, XO WHITE is NSF registered for use in water filtration systems.

30-50 WHITE TM

3050 WHITE TM is a dry ground marble with a very coarse particle size controlled between 30 and 50 mesh screens. This product is readily available at three locations across the United States. The Marble Hill product is NSF listed for water treatment.

 XO MSDS SHEET CLICK HERE

3050 MSDS SHEET CLICK HERE

XO DATA SHEET-CLICK HERE

3050 DATA SHEET-CLICK HERE

TYPICAL USE:
Textroflash™ Green is a complete air and vapor barrier system when adhered to above-grade substrates. Textroflash™ Green has self-adhering properties. Apply horizontally or vertically over the entire surface area following the installation instructions below. The non-asphaltic clear adhesive backing bonds to masonry, gypsum sheathing, concrete, steel and wood substrates.